Insulated Protection Of Power Equipment

Product Detail

Insulated protection for power equipment is the essential installed product of the power equipment connect terminate of the transformer and lightning arrester and the outside switchgear. It is effective to protect the original bare power equipment connect terminate from the power turnoff and electric shock, which is caused by the reasons such as personal contact, stolen power, small animal or other contact, moist flash salt fog and chemical corruption. Feature 1.Preferable electrical appliance function 2.Reliable insulation 3.Superior hermetic sealing 4.Excellent heat /cold proof, waterproof, Anti-aging , 5.Widely used at the field of electric power, electronic, petroleum, chemical engineering, construction and communication The production of heat shrinkable tubing must first select the appropriate masterbatch, and then select the auxiliary materials to produce specific The thermal housing casing. 1. The production process of heat shrinkable tube is firstly the production of polyene leech masterbatch: combining various polyene leech base materials with various functional auxiliary materials The materials are weighed according to the formula ratio and then mixed: the mixed materials are put into a twin-screw extruder and pelletized to produce a polyene leech functional masterbatch. 2. Product molding process: according to the shape of the product, two methods of single screw extrusion and injection molding can be used. For processing and production: 1. Single-screw extrusion type: mainly used for extrusion molding of heat sink pipes, such as single-wall heat-shrinkable tubes, double-wall heat-shrinkable tubes with glue, and medium thickness Wall heat sink pipes, high pressure busbar heat sink pipes, high temperature heat shrinkable pipes and other products are all processed and formed by single screw extrusion. The heat shrinkable tube production line should have the following equipment: extruder (heat sink tube forming), production mold, cooling water tank, tension device, and Disk device, etc. 2. Injection molding: mainly used for the production of heat-shrinkable special-shaped parts, such as heat sink caps, heat-shrinkable umbrella skirts, heat-shrinkable finger cots and other products They all use injection molding, and production equipment should include injection molding machines and injection molds. 3. The next important step is radiation cross-linking. The products formed by extrusion or injection molding are still linear molecular structures. Structure, the product does not yet have the “memory function”, and the performance of temperature resistance, aging resistance, and wear resistance is not enough. Change the molecular structure of the product. The method we usually use is radiation crosslinking modification: electron accelerator radiation crosslinking, cobalt source radiation Cross-linking, peroxide chemical cross-linking, at this time the molecule changes from a linear molecular structure to a network structure. Extruded products are passing After cross-linking, it has a "memory effect", which greatly enhances the temperature resistance, mechanical properties, and chemical properties of the heat shrinkable tube. The specific table Now the heat sink tube has changed from the state of tolerance to incompatible, aging resistance, abrasion resistance, and chemical corrosion resistance. 4. Expansion molding: The product modified by radiation crosslinking already has a "shape memory effect", and it has a high Non-melting performance under temperature. After heating at high temperature, vacuum blowing and cooling, it becomes the finished heat shrinkable tube, and then according to the tube The actual situation of the finished product packaging and closing can also be cut and printed according to customer needs. Neutral normal packaging is also available.

Code	Product of the assembled fitting	Mode	Connecting type	Numbers of the conductor
DB01	Zinc Oxide Lightning Arrester	LT10-DB01A	The lateral	One piece
DB02	Zinc Oxide Lightning Arrester	LT10-DB02B	The normal	One piece
DB03	Valve Type Lightning Arrester	LT10-DB03C	The normal	One piece
DB04	Zinc Oxide Lightning Arrester	LT10-DB04B	The leaned	One piece
M01	Bus-bar	LT10-M01A	The lateral	Bus-bar Specification
M02	Bus-bar	LT10-M02B	The leaned	Bus-bar Specification

Note:Special specifications can be produced according to the requirements of clients.

Code	Product of the assembled fitting	Mode	Connecting type	Numbers of the conductor
G01	No. 3,4 Equipment clamp 90°	LT10-G01B	The leaned	1×35mm²-240mm²
G02	No. 3,4 Equipment clamp 90°	LT10-G02B	The leaned	1×35mm²-240mm²
G03	Oil-immersed transformer clamp of one hole	LT10-G03C	The normal	1×35mm²-240mm²
G04	Oil-immersed transformer clamp of M16 hole or less	LT10-G04C	The normal	1×35mm²-240mm²
G05	No. 3,4 Equipment clamp 90°	LT10-G05B	The leaned	1×35mm²-240mm²
G06	No. 1,2 Equipment clamp 90°	LT10-G06B	The leaned	1×35mm²-240mm²
G07	No. 3,4 Equipment clamp 90°	LT10-G07B	The leaned	1×35mm²-240mm²
G08	Three poles of measuring box	LT10-G08A	The lateral	1×35mm²-240mm²
G09	No. 3,4 Equipment clamp 0°	LT10-G09C	The normal	1×35mm²-240mm²
DL3-1	Cut-out Switch	LT10-GL3-1A	The lateral	1×35mm²-240mm²
DL3-2	Cut-out Switch	LT10-GL3-2B	The lateral	1×35mm²-240mm²
DL4-1	Cut-out Switch	LT10-GL4-1A	The lateral	1×35mm²-240mm²
DL4-2	Cut-out Switch	LT10-GL4-2B	The lateral	1×35mm²-240mm²

Code	Product of the assembled fitting	Mode	Connecting type	Numbers of the conductor
G01	No. 3,4 Equipment clamp 90°	LT10-G01B	The leaned	1×35mm²-240mm²
G02	No. 3,4 Equipment clamp 90°	LT10-G02B	The leaned	1×35mm²-240mm²
G03	Oil-immersed transformer clamp of one hole	LT10-G03C	The normal	1×35mm²-240mm²
G04	Oil-immersed transformer clamp of M16 hole or less	LT10-G04C	The normal	1×35mm²-240mm²
G05	No. 3,4 Equipment clamp 90°	LT10-G05B	The leaned	1×35mm²-240mm²
G06	No. 1,2 Equipment clamp 90°	LT10-G06B	The leaned	1×35mm²-240mm²
G07	No. 3,4 Equipment clamp 90°	LT10-G07B	The leaned	1×35mm²-240mm²
G08	Three poles of measuring box	LT10-G08A	The lateral	1×35mm²-240mm²
G09	No. 3,4 Equipment clamp 0°	LT10-G09C	The normal	1×35mm²-240mm²
DL3-1	Cut-out Switch	LT10-GL3-1A	The lateral	1×35mm²-240mm²
DL3-2	Cut-out Switch	LT10-GL3-2B	The lateral	1×35mm²-240mm²
DL4-1	Cut-out Switch	LT10-GL4-1A	The lateral	1×35mm²-240mm²
DL4-2	Cut-out Switch	LT10-GL4-2B	The lateral	1×35mm²-240mm²

Code	Product of the assembled fitting	Mode	Connecting type	Numbers of the conductor
D01	Connectiing Terminal	LT10-D01A	The lateral	1×35mm²-240mm²
D02	Connectiing Terminal	LT10-D02A	The lateral	1×35mm²-240mm²
D03	Connectiing Terminal	LT10-D03A	The lateral	1×35mm²-240mm²
D04	Connectiing Terminal	LT10-D04B	The leaned	1×35mm²-240mm²
D05	Connectiing Terminal	LT10-D05A	The lateral	1×35mm²-240mm²
D06	Connectiing Terminal	LT10-D06A	The lateral	1×35mm²-240mm²
D07	Connectiing Terminal	LT10-D07A	The lateral	1×35mm²-240mm²
D08	Connectiing Terminal	LT10-D08B	The leaned	1×35mm²-240mm²
D09	Connectiing Terminal	LT10-D09A	The lateral	1×35mm²-240mm²

Q:CAN YOU HELP US IMPROT AND EXPORT?

A:We will have a professional team to serve you.

Q:WHAT'S THE CERTIFICATES DO YOU HAVE?

A:We have certificates of ISO,CE, BV,SGS.

Q:WHAT'S YOUR WARRANTY PERIOD?

A:1 year in general.

Q:CAN YOU DO OEM SERVICE?

A:YES,we can.

Q:WHAT YOU LEAD TIME?

A:Our standard models are in stock ,as for big orders ,it take about 15 days.

Q:CAN YOU PROVIDE FREE SAMPLES?

A:Yes,please contact us to know the sample policy.

Product Tags

Cold Shrink Tubing、Heat Shrink Tubing、Heat Shrinkable Busbar Tubing、Heat Shrinkable Tubing

Insulated Protection Of Power Equipment Related Video:

Insulated Protection Of Power Equipment

Related Products